CL TYPE S V6-3.2L SOHC (2001)
Air Bag: Service and Repair
Passenger Side
Front Passenger's Airbag Replacement
Removal
1. Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
2. Remove the glove box.
3. Remove the front passenger's airbag connector (A) from the holder (C), then disconnect the connector between the front passenger's airbag 4P
connector (A) and SRS main harness 4P connector (B).
4. Remove the harness clip (A) and the three mounting nuts (B) from the bracket. Cover the lid and dashboard with a cloth, and pry carefully with a
screwdriver to lift the front passenger's airbag (C) out of the dashboard.
NOTE: The airbag lid has pawls on its side that attach it to the dashboard.
Installation