CL TYPE S V6-3.2L SOHC (2001)
Power Door Lock Switch: Testing and Inspection
Door Lock Knob Switch Test
Door Lock Knob Switch Test
Driver's door:
1. Remove the driver's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 2 terminals when the door lock knob switch is in the LOCK position.
-
There should be continuity between the No. 2 and No. 3 terminals when the door lock knob switch is in the UNLOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
Passenger's door:
1. Remove the passenger's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals. There should be continuity between the No. 1 and No. 2 terminals when the door lock knob switch is
in the UNLOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
