CL TYPE S V6-3.2L SOHC (2001)
Power Mirror Position Switch/Sensor: Testing and Inspection
Power Mirror Position Sensor Troubleshooting
NOTE: Before troubleshooting, check the No.4 (7.5 A) fuse in the driver's under-dash fuse/relay box and test the power mirrors.
1. Turn the ignition switch ON (II)
2. Check for voltage between the B2 and B22 terminals of the passenger's multiplex control unit with the power mirror switch pressed UP.
Is there battery voltage?
YES - Go to step 3.
NO - Repair open in the RED/WHT or BLK wire.
3. Move the selector switch to Right.
4. Check for voltage between the B5 and B22 terminals with the power mirror switch pressed to the Right.
Is there battery voltage?
YES - Go to step 5.
NO - Repair open in the BLU/BLK wire.
5. Check for voltage between the B3 and B22 terminals with the power mirror switch pressed to the Left or Down.
Is there battery voltage?
YES - Go to step 6.
