CL TYPE S V6-3.2L SOHC (2001)
5. Check for voltage between the B3 and B22 terminals with the power mirror switch pressed to the Left or Down.
Is there battery voltage?
YES - Go to step 6.
NO - Repair open in the PUR wire.
6. Move the selector switch to Left.
7. Check for voltage between the B6 and B22 terminals with the power mirror switch pressed to the Right or Down.
Is there battery voltage?
YES - Go to step 8.
NO - Repair open in the BLU/RED wire.
8. Check for voltage between the B4 and B22 terminals with the power mirror switch pressed to the Left or Down.
Is there battery voltage?
YES - Go to step 9.
NO - Repair open in the ORN wire.
9. Turn the ignition switch OFF.
10. Disconnect the passenger's multiplex control unit 22P connector B.
