CL TYPE S V6-3.2L SOHC (2001)
-
If you have a wire seal, position the insulation crimp in the 5.5 crimping slot, then carefully squeeze the crimp closed until its ends are
touching and making a full-circle shape.
8. Inspect the quality of the wire crimp. If it has any of the following NO GOOD crimps, cut it off and start over.
9. Insert the terminal into the connector. Make sure the wire seals are pushed all the way into the connector. Lightly pull on the wires to make sure
the terminal is locked into place.
10. Close or insert the secondary terminal lock, if applicable, and reconnect the connector.
