CL TYPE S V6-3.2L SOHC (2001)
USING THE GR8 DIAGNOSTIC STATION - ED-18 BATTERY TEST FUNCTION
NOTE:
^
The ED-18 battery test function in the GR8 should be used only when your ED-18 is out of service.
^
For set up, customizing, and other available features, refer to the GR8 instruction manual besides the one that comes with the GR8, the GR8
instruction manual is also available online. Select GENERAL PUBLICATIONS, select Tool Information, then select GR8-1100P Battery
Diagnostic Station Instruction Manual from the list.
^
Make sure the setup has been completed, and the GR8 updated to the most current software. The date and software version is very important for
the proper result. Your warranty claim may not be paid if this information is wrong. See Tool Requirements under REQUIRED TOOLS for more
information.
1. Plug in the GR8.
2. Connect the leads to the battery's positive and negative terminals.
3. Use the arrow keys to select ENGLISH, then press Enter.
4. Use the arrow keys to select OPTIONS, then press Enter.
