CL TYPE S V6-3.2L SOHC (2001)
-
If there is continuity, go to step 23.
-
If there is no continuity, replace the alternator.
23. Check for no continuity between each lead and the coil core (B).
-
If there is no continuity, go to step 24.
-
If there is continuity, replace the alternator.
24. Assemble the alternator in reverse order of disassembly, and note these items:
-
Be careful not to get any grease or oil on the slip rings.
-
If you removed the pulley, tighten its locknut to 111 N.m (11.3 kgf.m, 81.7 lbf.ft) when you reinstall it.
