CL TYPE S V6-3.2L SOHC (2001)
11. Turn the ignition switch OFF.
12. Disconnect the PSP switch 2P connector.
13. Turn the ignition switch ON (II).
14. Measure voltage between ECM connector terminals A26 and E20.
Is there battery voltage?
YES - Replace the PSP switch.
NO - Go to step 15.
15. Turn the ignition switch OFF.
16. Disconnect ECM connector E (31P).
17. Check for continuity between body ground and ECM connector terminal E20.
Is there continuity?
YES - Repair short in the wire between the ECM (E20) and the PSP switch.
NO - Substitute a known-good ECM and recheck. If voltage is normal, replace the original ECM.
