CL TYPE S V6-3.2L SOHC (2001)
14. Remove the cotter pin (A) from the lower arm ball joint castle nut (B), and remove the nut.
15. Remove the lower ball joint from the knuckle using the special tool.
16. Remove the cotter pin (A) from the upper ball joint castle nut (B), and remove the nut.
17. Remove the upper ball joint from the knuckle using the special tool.
18. Pull the knuckle outward, and remove the driveshaft outboard joint (A) from the knuckle (B) by tapping the driveshaft end (C) with a plastic
hammer, then remove the knuckle.
