CL TYPE S V6-3.2L SOHC (2001)
Steering Gear: Service and Repair
Removal and Installation
Steering Gearbox Removal
Special Tools Required
Ball joint remover, 28 mm 07MAC-SL00200
Note these items during removal:
-
Using solvent and a brush, wash any oil and dirt off of the valve body unit its lines, and the end of the gearbox. Blow dry with compressed air.
-
Be sure to remove the steering wheel before disconnecting the steering joint. Damage to the cable reel can occur.
1. Drain the power steering fluid.
2. Raise the vehicle, and make sure it is securely supported.
3. Remove the front wheels.
4. Remove the driver's airbag assembly.
5. Remove the steering wheel.
6. Remove the steering joint cover.
7. Remove the steering joint bolts (A), disconnect the steering joint by moving the steering joint (B) toward the column.
