CL TYPE S V6-3.2L SOHC (2001)
2. Position the two tabs (A) of the turn signal canceling sleeve (B) as shown, and install the steering wheel on to the steering column shaft, making
sure the steering wheel hub (C) engages the pins (D) of the cable reel and tabs of the canceling sleeve. Do not tap on the steering wheel or steering
column shaft when installing the steering wheel.
3. Install the steering wheel bolt and tighten it to 39 Nm (4.0 kgf-m, 29 ft. lbs.).
4. Connect the radio remote switch connector and cruise control switch connector.
5. Install the driver's airbag and confirm that the system is operating properly.
6. Check the horn, radio remote switches, cruise control set/resume switches and turn signal canceling for proper operation.
