CL TYPE S V6-3.2L SOHC (2001)
Control Arm: Service and Repair
Lower Arm
Replacement
Special Tools Required
Ball joint remover, 28 mm 07MAC-SL00200
1. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheels.
2. Remove the damper fork.
^
1 Remove the damper pinch bolt (A).
^
2 Remove the self-locking nut (B) and flange bolt (C) from the damper fork (D).
^
3 Remove the damper fork from the damper.
3. Remove the cotter pin (A) from the lower arm ball joint, and remove the castle nut (B).
4. Remove the lower arm ball joint from the knuckle using the special tool.
5. Remove the lower arm.
