CL TYPE S V6-3.2L SOHC (2001)
1. Install the damper (A) on the frame with the aligning tab (B) facing inside, then loosely install the five flange nuts (C).
2. Install the damper fork (A) over the driveshaft and onto the lower arm. Install the damper in the damper fork so the aligning tab (B) is aligned with
the slot in the damper fork.
3. Loosely install the damper pinch bolt (C) on the damper fork.
4. Loosely install a new self-locking nut (D) with the flange bolt (E).
5. Raise the lower arm with a floor jack until the vehicle just lifts off the safety stand.
6. Tighten the damper pinch bolt to the specified torque.
7. Tighten the flange bolt and the self-locking nut to the specified torque.
8. Tighten the flange nuts on the top of the damper to the specified torque.
9. Install the front wheels.
