CL TYPE S V6-3.2L SOHC (2001)
Wheel Bearing: Service and Repair
Front
Replacement
Special Tools Required
-
Hub disassembly tool 07GAF-SE00100
-
Attachment 58 x 72 mm 07947-6340201
-
Bearing driver attachment 07965-SA00600
-
Driver 07749-0010000
-
Support base 07965-SD90100
1. Separate the hub (A) from the knuckle (B) using the special tool and a hydraulic press. Be careful not to distort the splash guard. Hold onto the
hub to keep it from falling when pressed clear.
2. Remove the snap ring (A) and the splash guard (B) from the knuckle (C).