CL TYPE S V6-3.2L SOHC (2001)
Pressure Regulating Solenoid: Testing and Inspection
A/T Clutch Pressure Control Solenoid Valve Assembly C Test
Test
1. Disconnect the connector from A/T clutch pressure control solenoid valve
2. Measure A/T clutch pressure control solenoid valve C resistance at the solenoid valve connector.
STANDARD: About 5.0 Ohms
3. If the resistance is out of standard, replace the A/T clutch pressure control solenoid valve C.
4. Connect the No. 1 terminal of the A/T clutch pressure control solenoid valve C to the battery positive terminal, and connect the No. 2 terminal to
the battery negative terminal. A clicking sound should be heard. Remove the A/T clutch pressure control solenoid valve C if no sound is heard.
5. Check the fluid passage of the A/T clutch pressure control solenoid valve C for dust and dirt.
6. Connect the No. 1 terminal of the A/T clutch pressure control solenoid valve C to the battery positive terminal, and connect the No. 2 terminal to
the battery negative terminal. Make sure the A/T clutch pressure control solenoid valve C moves.
7. Disconnect one of the battery terminals and check valve movement.
NOTE: You can see the valve movement through the fluid passage in the mounting surface of the body (A).
8. If the valve binds, or moves sluggishly, or if the solenoid does not operate, replace the A/T clutch pressure control solenoid valve C.
