CL TYPE S V6-3.2L SOHC (2001)
Shift Cable: Adjustments
Adjustment
1. Shift the transmission into the R position.
2. Remove the console panel.
3. Remove the nut securing the shift cable end (A), then separate the end from the shift lever assembly.
4. Rotate the socket holder (A) on the shift cable (B) a quarter turn; the tab (C) on the socket holder will be in the opening of the shift lever bracket
base (D). Then slide the holder to remove the shift cable from the shift lever bracket base (D). Do not remove the shift cable by twisting the shift
cable guide (E) and damper (F).
5. Push the shift cable (A) until it stops, then release your hand. Pull the shift cable back one step so that the shift position is in R. Do not hold the
shift cable guide (B) to Push and pull the shift cable.
6. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
7. Turn the ignition switch OFF.
