CL TYPE S V6-3.2L SOHC (2001)
2. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
3. If necessary, push the shift cable (A} until it stops, then release your hand. Pull the shift cable back one step so that the shift position is in R. Do
not hold the shift cable guide (B) to push and pull the shift cable.
4. Turn the ignition switch OFF.
5. Insert a 6.0 mm (0.24 inch) pin (A) into the positioning hole (B) on the shift lever bracket base through the positioning hole on the shift lever
assembly. The shift lever is secured in the R position.
6. Align the socket holder (A) on the shift cable (B) with the slot in the bracket base (C), then slide the holder into the base. Install the shift cable end
