CL TYPE S V6-3.2L SOHC (2001)
TOOL DESCRIPTION
CLEANING PROCEDURE
The cleaning procedure involves hot fluid under high pressure. Check the security of all hoses and connections. Always wear safety glasses or a face
shield, gloves, and protective clothing. If you get ATF in your eyes or on your skin, rinse with water immediately.
!WARNING
Improper use of the ATF cooler cleaner can result in burns and other serious injuries.
Always wear eye protection and protective clothing, and follow all instructions in this bulletin.
1.
Plug the ATF cooler cleaner into a 110 V grounded electrical outlet.
[NOTICE]
Make sure the outlet has no other appliances (light fixtures, drop lights, extension cords) plugged into it. Also, never plug the cooler cleaner into an
extension cord or drop light cord; you would damage the unit.
