CL TYPE S V6-3.2L SOHC (2001)
6. Pack the interior of the outer seal (A). Install the outer seal into the bearing support (B) using the special tools and a press.
7. Install the heat shield onto the bearing support.
Installation
1. Use solvent or carburetor cleaner to thoroughly clean the areas where the intermediate shaft (A) contacts the transmission (differential), and dry
with compressed air. Insert the intermediate shaft assembly into the differential. Hold the intermediate shaft horizontal to prevent damage to the
differential oil seal (B).
2. Install the flange bolt (A) and two dowel bolts (B).
3. Install the right driveshaft.
