CL TYPE S V6-3.2L SOHC (2001)
Transmission Position Switch/Sensor: Technical Service Bulletins
A/T - DTC P1706 or P0706
SOURCE: Acura Service News
TITLE: A/T DTC P1706 or P0706? Look for Loose Control Shaft
APPLIES TO:
97-99 3.0 CL
01-03 3.2CL
01-02 MDX
02-05 RSK
99-03 3.2 TL
04-05 TL
04-05 TSX
SERVICE TIP:
Troubleshooting an A/T DTC P1706 (A/T gear position switch open) or A/T DTC P0706 (transmission range switch open)? The problem could be a
loose control shaft that the switch mounts to. If the shaft is loose, the switch won't fit snugly, and this DTC can set.
NOTE: For '97-99 3.0CLs and '99-03 3.2TLs, this switch is called the A/T gear position switch. For all other models, it's called the transmission range
switch.
To fix this problem, remove the switch from the control shaft, and measure the diameter of the shaft across the machined flats. The shaft should measure
6.1 mm.
-
If the shaft diameter measures less than 6.1 mm, use a flat-tip screwdriver to spread the flats until the shaft diameter measures 6.1 mm.
-
If the shaft diameter already measures 6.1 mm, check the shift cable adjustment. If the shift cable is OK, then continue with normal
troubleshooting for the DTC.
