CL TYPE S V6-3.2L SOHC (2001)
Front Door Window Regulator: Service and Repair
Door Glass and Regulator Replacement
1. Remove:
-
Door panel
-
Plastic cover
2. Carefully raise the glass (A) until you can see the bolts (B), then remove them. Carefully pull the glass out through the window slot. Take care not
to drop the glass inside the door.
3. Disconnect and detach the connector (A) and harness clip (B) from the door. Remove the bolts (C) and (E), and loosen the bolts (D), then remove
the regulator (F) through the hole in the door.
