CL TYPE S V6-3.2L SOHC (2001)
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Remove the right front wheel.
2.
Remove the five clips and the bolt, then pull back the right inner fender to expose the washer reservoir.
3.
Carefully Cut the washer tubing oft the washer pump with a razor knife, then drain and discard the fluid from the reservoir.
4.
Fill the reservoir with clean water, then drain it.
5.
Remove the hood insulator with a clip remover. (If needed, see page 20-100 of the 1999-01 3.2TL Service Manual or page 20-86 of the 2001
3.2CL Service Manual.)
