Integra L4-1590cc 1.6L DOHC FI (1987)
Brake Caliper: Service and Repair
Rear
REAR
Removal & Disassembly
Fig. 8 Exploded view of rear disc brake assembly. Integra
1.
Raise and support rear of vehicle and remove wheels.
2.
Remove caliper shield, then disconnect parking brake cable from caliper.
3.
Remove banjo bolt and disconnect brake line from caliper. Secure hose in raised position to prevent leakage.
4.
Remove caliper mounting bolts and the caliper, Fig. 8.
5.
Remove pad spring from caliper.
6.
Remove piston and piston boot using needle-nose pliers. Rotate piston as it is removed.
7.
On Integra models, remove circlip, washer, adjusting spring and adjusting nut from piston.
8.
On Legend models, remove retaining ring, spacer, wave washer, spacer, ball bearing, adjuster nut and cup from piston.
9.
On all models, carefully pry piston seal out of caliper bore.