Integra L4-1590cc 1.6L DOHC FI (1987)
Fig. 14 Camshaft holder installation. Integra
c. Apply suitable sealant to cylinder head mating surfaces of Nos. 1 and 6 camshaft holders, then install and temporarily tighten all holders.
Apply clean engine oil to bolts indicated in Fig. 14.
d. Install camshaft seals using a suitable driver.
e. Torque camshaft holder attaching bolts to 9 ft. lbs. Alternately tighten bolts two turns at a time to prevent rocker arms from binding on
valves.
Fig. 15 Camshaft pulley installation. Integra
f.
Install camshaft keys and pulleys, Fig. 15.