Integra L4-1590cc 1.6L DOHC FI (1987)
Fig. 7 Igniter Terminal Identification.
Fig. 8 Igniter Terminal Identification.
1.
On Legend models, remove distributor from cylinder head.
2.
On all models, remove igniter cover and igniter unit.
3.
With ignition switch On, check for battery voltage between Bu (1) terminal and ground and between Bl/Y terminal and ground of pickup coil,
Figs. 5 and 6.
4.
Using suitable ohmmeter, check resistance between terminals G and Bu (2) of pickup coil. Resistance should be 650-850 ohms at room
temperature. If resistance is not as specified, replace pickup coil.
