Integra L4-1590cc 1.6L DOHC FI (1987)
Ignition Lock: Service and Repair
1.
Remove ignition switch as previously described.
2.
On Legend models, remove key light case socket and bulb by rotating socket 45°, then remove screw and case from lock assembly, if equipped.
3.
Insert ignition key and move switch to ``I'' position.
4.
Depress pin and remove lock cylinder from body.
5.
Turn ignition key to ``lock'' position and align lock cylinder with body.
6.
Turn key almost to ``I'' position and insert lock cylinder until pin contacts body.
7.
Turn key to ``I'' position, then depress pin and insert lock cylinder until pin clicks into place.
8.
Install ignition switch.