Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2655001.png)
Antenna: Technical Service Bulletins
Diagnosis 2. Electrical Noise or Interference
1.
Disconnect the coaxial cable from the antenna.
2.
Measure the resistance between the antenna collar and body ground.
^
If the resistance is more than 1 ohm, go to CORRECTIVE ACTION, Antenna Collar Replacement.
^
It the resistance is less than 1 ohm, continue with step 3.
3.
Measure the resistance between the antenna tube and the outside contact of the antenna jack.
^
If the resistance is more than 1 ohm, go to CORRECTIVE ACTION, Antenna Tube Replacement.
^
If the resistance is less than 1 ohm, continue with Coaxial Cable Test.
