Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2660003.png)
21.
Install the antenna assembly into the car, but do not tighten the antenna motor mounting nut(s) at this time.
22.
Connect the power connector, the coaxial cable, and the drain tube to the antenna assembly.
23.
Insert the antenna mast into the antenna tube; then turn the radio off to retract the antenna mast.
24.
Reinstall the antenna nut; then tighten it to specified torque using the special tool and a torque wrench.
^
199O-93 Integra: 2.0 Nm (0.20 kg-m, 17 lb-in)
^
1994-95 Integra: 2.3 Nm (0.23 kg-m, 20 lb-in)
^
1992-94 Vigor: 2.3 Nm (0.23 kg-m, 20 lb-in)
25.
Tighten the antenna motor mounting nut(s).
Antenna Collar Replacement
1.
Remove the antenna nut with the special tool.
