Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2959002.png)
Fig. 24 Set/resume/cancel Switch
1.
Remove steering wheel and check for continuity between terminals in each switch position as shown in Figs. 23 and 24.
2.
Remove column cover, then disconnect 3-P connector.
3.
On 1989 models, while turning slip ring, check for continuity between the blue/red and F terminal, light green/red and D terminal, and light
green/black and E terminal.
4.
On 1990-91 models, while turning slip ring, check for continuity between the blue/red and D terminal and light green/red and F terminal.
5.
On all models, if any one or more do not have continuity, replace switch.
