Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-883005.png)
3. Install the timing belt tightly in the sequence shown.
(1) Timing belt drive pulley (crankshaft)
(2) Adjusting pulley
(3) Water pump pulley
(4) Intake camshaft pulley
(5) Exhaust camshaft pulley
4. Loosen the adjusting bolt and retighten it after tensioning the belt.
5. Rotate the crankshaft about 4 or 6 turns counter-clockwise so that the belt positions on the pulleys.
6. Adjust the timing belt tension.
7. Check the crankshaft pulley and the camshaft pulleys at TDC.
