Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
3. Adjust valve clearance on No.1 cylinder.
Intake: 0.15-0.19 mm (0.006-0.007 in.)
Exhaust: 0.17-0.21 mm (0.007-0.008 in.)
4. Loosen the locknut and turn the adjusting screw until feeler gauge slides back and forth with a slight amount of drag.
5. Tighten locknut and recheck clearance again. Repeat adjustment if necessary.
6. Rotate the crankshaft 180° counterclockwise (cam pulley turns 90°). The 'UP" mark should be on the exhaust side Adjust valves on No. 3 cylinder.