Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
19.
Reconnect the wires to the igniter and ignition coil terminals.
20.
Install the original leak cover. Install the rotor, distributor cap, cap seal, and 0-ring from the distributor cap kit.
21.
Apply a small amount of clean engine oil to the 0-ring that goes between the distributor and the head. Install the distributor on the head.
22.
Install the spark plug wires. Reconnect the 2-P and 8-P connectors. Install the two electrical connectors on the bracket.
23.
Set the ignition timing according to the procedure in the service manual.