Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
Lock-up Shift Valve: Service and Repair
Lock-up Control Solenoid Valve Replacement
1. Remove the mounting bolts and lock-up control solenoid valve assembly.
NOTE: Be sure to remove or replace the lock-up control solenoid valves A and B as an assembly.
2. Check the lock-up control solenoid valve oil passages for dust or dirt and replace as an assembly, if necessary.
3. Clean the mounting surface and oil passages of the lock-up control solenoid valve assembly and install a new base gasket.
4. Check the connector for rust, dirt or oil and reconnect it securely.