Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
make sure the joint does not move on the driveshaft.
16.
Fit the small end of the boot into the boot groove on the driveshaft.
17.
Install the small boot band provided in the kit. Bend both sets of locking tabs over, then tightly tap them flat.
18.
Pack the outboard joint with the grease included in the kit. Pack the outboard boot with the remaining grease. then fit the boot over the outboard
joint.
19.
Install the large boot band provided in the kit. Bend both sets of locking tabs over, then lightly tap them flat.
20.
Reinstall the driveshaft assembly in the car. Refer to Section 16 of the appropriate service manual.
PARTS INFORMATION
Driveshaft Outboard Joint Kit:
1986-89 Integra (ALL):
P/N 44014-SE0-930
1990-93 Integra with ABS: [NEW]
P/N 44014-SK7-J71
1990-93 Integra (ALL) except ABS: [NEW]
P/N 44014-SK7-J01
1986-90 Legend Coupe and Sedan (ALL):
P/N 44014-5D4-950
1991-95 Legend Coupe and Sedan (ALL): [NEW]
P/N 44014-SP0-C00
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
Labor operation: Replace driveshaft outboard joint(s), and road test.
Defect code: 042
Contention code: B07