Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
Fig. 8 Driveshaft Dynamic Damper Installation
Fig. 9 Driveshaft Dynamic Damper Installation
g. On Integra models, install dynamic damper at specified dimension, Figs. 8 and 9.
h. On Integra models, install new spring clip in groove of CV joint sub-axle. Ensure clip locks properly into differential or intermediate
shaft groove.
i.
On Legend models, install new set ring into driveshaft groove, then position inboard end of driveshaft into differential. Ensure driveshaft
locks in differential side gear groove and CV joint sub-axle bottoms in differential or intermediate shaft.