Integra L4-1678cc 1.7L DOHC (VTEC) FI (1992)
_fi/Page-2101001.png)
Synchronizer Ring: Testing and Inspection
Inspection
1. Inspect the synchro ring and gear.
A: Inspect the inside of the synchro ring for wear.
B: Inspect the synchro sleeve teeth and matching teeth on the synchro ring for wear (rounded off).
C: Inspect the synchro sleeve teeth and matching teeth on the gear for wear (rounded off).
D: Inspect the gear hub thrust surface for wear.
E: Inspect the cone surface for wear and roughness.
