Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
Front Door Window Motor: Testing and Inspection
Passenger's Window Motor Test
PASSENGER'S WINDOW MOTOR / TEST
1. Remove the passenger's door panel.
2. Disconnect the 2-P connector from the motor.
NOTE:
*
Front passenger's door is symmetrical to driver's door.
*
The illustration shows the right rear door, left rear door is symmetrical.
3. Test the motor in each direction by connecting battery power and ground according to the table.
CAUTION: When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it.