Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
Rear Door Exterior Handle: Service and Repair
Outer Handle Replacement
NOTE: Raise the glass fully.
1. Remove:
^
Door panel
^
Plastic cover
2. Remove the screws and clip, then move the latch.
3. Remove the bolts.
4. Pull out the outer handle with the latch.
Pry the outer handle rod out of its joint using diagonal cutters.
NOTE:
^
To ease reassembly, note location of the outer handle rod on the joint before disconnecting it.
^
Take care not to bend the outer handle rod.
^
Use a shop towel to protect the opening in the door.