Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
7. Remove the cylinder head cover.
8. Remove the pulley bolt and crankshaft pulley.
9. Remove the middle cover and the lower cover.
NOTE:
-
Do not use the middle cover and lower cover for storing removed items.
-
Clean the middle cover and lower cover before installation.
10. Loosen the adjusting bolt 180°.
11. Push the tensioner to remove tension from the timing belt, then retighten the bolt.
12. Remove the timing belt from the pulleys.
NOTE: Replace the camshaft and crankshaft seals if there are signs of oil leakage.
TIMING BELT INSTALLATION
NOTE:
-
Position crankshaft and pulley before installing belt.
-
Replace the rubber seals if there is oil leakage between the cylinder head and cover.
-
Clean the middle cover and lower cover before installation.
Install the timing belt in the reverse order of removal. Only key points are described here.