Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
NOTE:
-
When installing a new crankshaft and/or new pulley bolt:
(1) tighten the pulley bolt to 196 N.m (20.0 kgf.m, 145 lbf.ft),
(2) loosen the bolt,
(3) retighten it to 177 N.m (18.0 kgf.m, 130 lbf.ft).
-
When installing the bolt, lubricate the threads and flange with engine oil, but don't lubricate the washer and pulley.
After installation, adjust the tension of each drive belt.