Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) (1994)
Variable Valve Timing Solenoid: Service and Repair
Solenoid Valve Assembly
VTEC Solenoid And Solenoid Valve Location
REMOVAL
1.
Turn off the ignition.
2.
Disconnect the 2-wire connector from the solenoid.
3.
Remove the 3 bolts attaching the solenoid to the cylinder head.
4.
Remove the filter and O-ring.
5.
Clean all mating surfaces before installing.
INSTALLATION
1.
Install new O-ring and filter.
2.
Align solenoid to cylinder head.
3.
Torque solenoid assembly to 12 Nm (8.7 ft lb).
4.
Re-connect the 2-wire connector to the solenoid.