Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) (1994)
PGM-FI Main Relay: Service and Repair
WARNING: Before performing, be sure the ignition switch is OFF unless otherwise needed.
PGM-FI Relay Location
1.
Locate Programmed Fuel Injection (PGM-FI) main relay under driver's side dashboard (7-wire).
2.
Carefully separate connector from relay.
3.
Connect connector to new relay.
4.
Turn ignition switch ON, wait 2 seconds, then turn key to START.
5.
If vehicle does not start, refer to On-Board Diagnosis.