Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) (1994)
/l4-1797cc_1.8l_dohc_(vtec)/Page-400002.png)
4. Remove the left side cover from the SRS unit, then disconnect the SRS main harness 18-P connector from the SRS unit.
5. Remove the four TORX® bolts from the SRS unit, then pull out the SRS unit from the driver's side.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other car parts.
6. Install the new SRS unit.
7. Connect the SRS main harness 18-P connector to the SRS unit; push it into position until it clicks.
