Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) (1994)
4.Center the cable reel, Do this by first rotating the cable reel clockwise until it stops. Then rotate it counterclockwise (approximately two turns) until:
-
The yellow gear tooth lines up with the alignment mark on the cover.
-
The arrow mark on the cable reel label points straight up.
5. Install the steering wheel and attach the cable reel 3-P connector to the clip.
6. Connect the horn connector and cruise control set/resume switch connector.
7. Install the steering wheel nut.