acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Specifications|Page 1345

Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) (1994)

Page 1
background image

Knock Sensor: Service and Repair

Knock Sensor Location

WARNING: Perform this on a engine that has cooled to prevent burns.

1. Disconnect 1-wire (RED/BLU) connector from Knock Sensor.
2. Remove Knock Sensor from cylinder head.
3. Install new knock sensor, torque to 32 Nm (23 ft lb).
4. Re-connect 1-wire connector to sensor.

Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Specifications|Page 1345