acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Wire Harness Replacement|Page 5402 > < Wire Harness Replacement|Page 5400
Page 3
background image

4. Start the engine and let it idle for a minute.

Check that:

-

ABS indicator light is off.

-

Brake fluid is not leaking from the brake pipe joints.

5. Stop the engine.

6. Check whether the brake fluid level in the reservoir is at the MAX (upper) level. If the level is low, add fresh fluid until the reservoir is refilled to

the MAX (upper) level.

7. Bleed air from the brake system. See: Brake Bleeding/Service and Repair/Bleeding Procedures

8. Check the ABS function using the ALB checker.

Wire Harness Replacement|Page 5402 > < Wire Harness Replacement|Page 5400