Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
Brake Master Cylinder: Service and Repair
CAUTION:
-
Be careful not to bend or damage the brake pipes when removing the master cylinder.
-
Do not spill brake fluid on the car: it may damage the paint: if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
Removal
1. Disconnect the brake fluid level switch connectors.
2. Remove the reservoir cap from the master cylinder.
3. The brake fluid may be sucked out through the top of the master cylinder reservoir.
4. Disconnect the brake pipes from the master cylinder.
5. Remove the master cylinder mounting nuts and the master cylinder from the brake booster.