Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
/l4-1834cc_1.8l_dohc_pfi/Page-950002.png)
Fig. 82 Connecting Rid Bearing Identification
2. Numbers are stamped on the side of each connecting rod to code the size of the large end. Use these numbers in conjunction with letters stamped
on crankshaft, Fig. 82, to select correct bearings.
3. Torque main bearing cap bolts in two steps: first to 14 ft. lbs., then to 23 ft. lbs.
