acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Exhaust Pipe/Muffler Hanger > < All Technical Service Bulletins for Exhaust Pipe:|97-035|Page 2641
Page 2
background image

DIAGNOSIS

1.

Warm the engine to normal operating temperature.

2.

Rev the engine between 3,000 and 5,000 rpm, and listen for a steady buzzing noise from exhaust pipe A; if you hear it, continue to REPAIR
PROCEDURE.

REPAIR PROCEDURE

1.

Raise the vehicle, and let the exhaust system cool for at least 30 minutes.

2.

Remove and discard the seven self-locking nuts from exhaust pipe A.

3.

Remove the pipe and the three exhaust gaskets.

4.

Install the new pipe in the reverse order of removal. using new exhaust gaskets and self-locking nuts.

5.

Start the engine, and confirm that the noise is gone.

Exhaust Pipe/Muffler Hanger > < All Technical Service Bulletins for Exhaust Pipe:|97-035|Page 2641