Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
Crankshaft Pulley Bolt / Replacement
NOTE:
-
Crankshaft pulley bolt size and torque value:
14 x 1.25 mm
77 N.m (18.0 kgf.m, 130 lbf.ft)
-
When installing a new crankshaft and/or new pulley bolt:
(1) tighten the pulley bolt to 196 N.m (20.0 kgf.m, 145 lbf.ft)
(2) loosen the bolt
(3) retighten it to 177 Nm (18.0 kgf.m, 130 lbf.ft).
-
When installing the bolt, lubricate the threads and flange with engine oil, but don't lubricate the washer and pulley.
9. Remove the middle cover and the lower cover.
NOTE:
-
Do not use the middle cover and lower cover for storing removed items.
-
Clean the middle cover and lower cover before installation.
10. Loosen the adjusting bolt 180°.
11. Push the tensioner to remove tension from the timing belt, then retighten the bolt.
12. Remove the timing belt from the pulleys.
NOTE: Replace the camshaft and crankshaft seals when oil leakage.
NOTE: Push the tensioner pulley to loosen the belt.
Installation
NOTE: